
Smart Home Security: A Setup Checklist for Your Router and Devices
· VPNSoEasy Staff
Most smart home security problems come down to setup. A camera installed in five minutes with the default settings stays that way for years. This checklist walks through what to do on your router first, then on each new device, so the whole home network starts out locked down. If you want the background on what attackers actually go after, read our rundown of the top five IoT threats first.
Start with the router
The router is the front door for every smart device you own. Fix it once and every device behind it benefits.
- Change the router’s admin password. This is the password for the router’s settings page, not your Wi-Fi password. Many routers still ship with a shared default.
- Update the firmware from the admin page or the router’s app, and turn on automatic updates if it has them.
- Use WPA3 encryption, or WPA2/WPA3 mixed mode if older devices won’t connect. Avoid WEP and plain WPA.
- Set a long Wi-Fi password. A passphrase of several random words is easier to type on a TV remote than a jumble of symbols and is still hard to guess.
- Turn off WPS (the push-button pairing feature), which has a history of weaknesses.
- Turn off remote administration so the settings page can’t be reached from the internet.
- Turn off UPnP unless a game console or app you rely on stops working without it. UPnP lets devices open ports on your router without asking.
Give smart devices their own network
Most routers can run a guest network, and many newer ones have a dedicated IoT network option. Put cameras, plugs, speakers, TVs and appliances there, and keep laptops and phones that hold your email and banking on the main network. If one cheap device is compromised, the attacker lands on a network with nothing valuable on it.
One practical catch: some devices need to be on the same network as your phone during setup. If so, set the device up, then move your phone back to the main network. Casting and local control may still need both on the same network, so test what you use.
Checklist for every new device
- Buy from a maker that publishes security updates, and check how long it promises to support the model.
- Change the default password or create the account with a unique password from your password manager.
- Turn on two-factor authentication in the companion app. For cameras and door locks this matters most, because an account takeover means someone can watch or unlock your home.
- Update firmware before you rely on the device, and enable automatic updates.
- Review permissions in the companion app. Turn off location history, microphone access or contact syncing it doesn’t need.
- Turn off features you won’t use, such as remote access, cloud recording you don’t pay attention to, or voice purchasing.
- Review sharing. Remove old household members, past renters or installers from shared device access.
Cameras, doorbells and locks deserve extra care
These are the devices where a breach is personal. Point indoor cameras away from bedrooms and bathrooms, use privacy modes or schedules when you’re home, check whether footage is end-to-end encrypted and turn that on if it’s offered, and review the app’s list of signed-in devices regularly.
Checking your devices from outside the house
When you open the camera app on hotel or airport Wi-Fi, that traffic crosses a network you don’t control. The camera app should already encrypt its connection, but a VPN on your phone adds a second layer and hides which services you’re using from the network operator. A VPN on your phone doesn’t secure the devices at home; the router and device steps above do that. For more on this, see our VPN guide for families.
Keep it up
Once a month, open the router’s list of connected devices and remove anything you don’t recognize, and check for firmware updates. Twice a year, review shared access and retire devices that no longer get security updates. That routine keeps a smart home secure long after the excitement of setup wears off.